Products
Thermostat
| Product Name | Thermostat | Specification Color | 12*6.3cm White |
| Material | Plastic | ||
| Model | NMM-01 | ||
| Feature | The length of temperature detection wire is 2.4m. Can connect two hole or three hole heating equipment. The maximum load power is 1500W. The temperature is controlled between -9 ~ 39℃. |
||
| Introduction | Operating instructions 1. When the controller is powered on, the current actual temperature is displayed in the temperature bar and [RUN] is displayed in the status bar. The set temperature can be remembered. 2.[+] button: used to raise the set temperature In the setting state, press this button once to set the temperature to increase by 1℃. Hold this button to continuously increase the temperature until the 39℃. without pressing any key for 5 seconds, the thermostat will automatically save the current set temperature and return to the running state. The power will be restored after the power grid is cut off, and the controller will operate at the temperature set in the last memory. 3.[-] button: used to lower the set temperature In the setting state, press this button once to set the temperature to be lowered by 1℃. Hold this button and the temperature can be lowered continuously until the -9℃. without pressing any key for 5 seconds, the thermostat will automatically save the current set temperature and return to the running state. The power will be restored after the power grid is cut off, and the controller will operate at the temperature set in the last memory.Operating mode When the control temperature is ≥ set temperature +1℃, cut off the load power supply; when the control temperature is ≤ set temperature -1℃, turn on the load power supply. when the set temperature -1℃ ≤ environment temperature ＜set temperature +1℃, operate at the temperature set in the last memory.Temperature Range:-9 ~ 39℃. |
||
Write your message here and send it to us
